Brand guide
Ideal boiler fault codes
Ideal boilers use F codes for faults the boiler is waiting on, and L codes for lockouts, where the boiler has shut itself off until it's reset. F1 (low pressure) and L2 (ignition lockout) are the two you're most likely to see.
Covers: Logic, Logic+, Logic Max, Vogue, Exclusive and i-mini.
| Code | What it means | Can you fix it? |
|---|---|---|
| F1 | Low water pressure | Usually DIY |
| F2 | Flame loss | Check first |
| F3 | Fan fault | Check first |
| F4 | Flow temperature sensor fault | Check first |
| L2 | Ignition lockout | Check first |
| L1 | Low water flow | Check first |
| L5 | Return problem | Check first |
| FD | No water flow | Check first |
| F5 | Return thermistor fault | Engineer |
| F6 | Outside sensor fault | Check first |
| F7 | Low mains voltage | Check first |
| F9 | Unconfigured circuit board | Engineer |
| FU | Flow and return 50°C apart | Check first |
| FA | Flow and return reversed | Check first |
| FL | Flame loss | Check first |
| L4 | Flow thermistor fault | Engineer |
| L6 | Flame detection fault | Engineer |
| L9 | Return thermistor fault or overheat | Check first |
| LA | Boiler overheated | Check first |
| LF | Failed to ignite | Check first |
| LC | Too many resets | Check first |
| C0 | Boiler chip card activation fault | Engineer |
| C2 | Boiler chip card fault | Engineer |
| H3 | Hot water thermistor fault | Engineer |
Resetting a Ideal boiler
Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button.
Before you call anyone
Most Ideal faults we see searched for come down to three things: low water pressure, no gas reaching the boiler, or a frozen condensate pipe in winter. Check all three first.
Need it fixed?
Get a Gas Safe engineer to call you back about Ideal boiler, or cover future breakdowns with a monthly plan.
Some links are partner links. How we make money.