Ideal fault code
Ideal F3: fan fault
Try the checks, then call an engineerChecked against 2 sources ยท Updated November 2026
The boiler has detected a problem with the fan. Ideal says to restart the boiler first, which often clears it.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
- Look at the flue from outside. Check the flue terminal on the outside wall or roof isn't blocked by leaves, a nest, snow or something stacked in front of it. Don't touch, cover or take apart the flue itself.
Common causes
- A temporary fan fault
- A failing fan
- A blocked flue
When to call an engineer
If the restart doesn't clear it, contact Ideal under warranty or a Gas Safe engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Ideal F3 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Ideal boiler
Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.