Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Ideal fault code

Ideal L2: ignition lockout

Try the checks, then call an engineer
What it means

The boiler failed to light, or lost its flame, and has locked itself out for safety. It's one of the most common Ideal codes, especially in winter.

Safe checks you can do

  1. Check you have gas. Try the hob or another gas appliance. If nothing works, check the lever on the gas meter is in line with the pipe (that means on) and, on a prepayment meter, that you have credit.
  2. Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
  3. Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this

Common causes

  • No gas or low gas pressure, including a frozen gas meter regulator in very cold weather
  • A frozen or blocked condensate pipe
  • A worn flame sensor (Heatable calls this the most common cause)
  • A faulty gas valve or ignition part

When to call an engineer

BOXT advises calling an engineer if you hear a rumbling noise when it tries to light. Also call one if L2 keeps coming back once your gas is confirmed working.

Need it fixed?

Get a Gas Safe engineer to call you back about Ideal L2, or cover future breakdowns with a monthly plan.

Some links are partner links. How we make money.

Can I fix Ideal L2 myself?

Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.

How to reset a Ideal boiler

Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.