Ideal fault code
Ideal F4: flow temperature sensor fault
Try the checks, then call an engineerChecked against 2 sources ยท Updated November 2026
The boiler has a problem reading the flow thermistor, the temperature sensor on the water leaving the boiler. Ideal says to restart the appliance.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- A temporary sensor glitch
- A faulty thermistor or wiring
When to call an engineer
If it comes back after a restart, the sensor needs replacing by an engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Ideal F4 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Ideal boiler
Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.