Ideal fault code
Ideal F9: unconfigured circuit board
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
The circuit board hasn't been set up, usually after a replacement.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- A setting or part not configured after installation or repair
- The wrong replacement part or code plug fitted
When to call an engineer
This usually appears after work on the boiler. Ask whoever last worked on it to come back, or book a Gas Safe engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Ideal F9 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Ideal boiler
Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.