Ideal fault code
Ideal F5: return thermistor fault
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
The return temperature sensor has failed or is disconnected. iHeat says reset first.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- A failed temperature sensor (thermistor)
- A loose or damaged sensor connection
When to call an engineer
Sensors are usually cheap parts, but they sit inside the boiler, so an engineer needs to test and replace them.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Ideal F5 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Ideal boiler
Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.