Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Ideal fault code

Ideal L5: return problem

Try the checks, then call an engineer

Checked against 2 sources ยท Updated November 2026

What it means

Ideal says L5 means there's a problem with the return, the pipe bringing water back into the boiler.

Safe checks you can do

  1. Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.

Common causes

  • A temporary electronics fault
  • A return sensor or circulation problem

When to call an engineer

Ideal's advice is to turn the boiler off at the fused spur for a few seconds and back on. If it still won't run, contact Ideal or a Gas Safe engineer.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Ideal L5 myself?

Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.

How to reset a Ideal boiler

Turn the dial to the reset position for about five seconds, then back. Newer models have a reset button. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.