Worcester Bosch fault code
Worcester Bosch F0 237: internal error
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
An internal error, or a gas valve or control box error on Greenstar i models.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- A fault on the main circuit board
- A loose internal connection
- A power surge
When to call an engineer
If turning the power off and on doesn't clear it, the circuit board needs checking by an engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Worcester Bosch F0 237 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Worcester Bosch boiler
Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.