Worcester Bosch fault code
Worcester Bosch EA 227: no flame detected after ignition
Try the checks, then call an engineerThe boiler tried to light several times and didn't detect a flame. HomeServe notes Worcester boilers make four ignition attempts, with a pause between each, before locking out with EA 227.
Safe checks you can do
- Check you have gas. Try the hob or another gas appliance. If nothing works, check the lever on the gas meter is in line with the pipe (that means on) and, on a prepayment meter, that you have credit.
- Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
- Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this
Common causes
- No gas: meter off, prepayment credit run out, or a supply fault
- A frozen condensate pipe in freezing weather
- A faulty ignition electrode, lead or gas valve
- Low gas pressure
When to call an engineer
If you have gas, the condensate pipe is clear, and EA 227 comes back after a reset, book a Gas Safe engineer.
Need it fixed?
Get a Gas Safe engineer to call you back about Worcester Bosch EA 227, or cover future breakdowns with a monthly plan.
Some links are partner links. How we make money.
Can I fix Worcester Bosch EA 227 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Worcester Bosch boiler
Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.