Worcester Bosch fault code
Worcester Bosch C6: fan fault
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
The fan is running too fast, too slow or not at all. HomeServe lists the cause codes 214, 215, 216 and 217, which tell you which.
Safe checks you can do
- Look at the flue from outside. Check the flue terminal on the outside wall or roof isn't blocked by leaves, a nest, snow or something stacked in front of it. Don't touch, cover or take apart the flue itself.
Common causes
- A failing fan
- A blocked flue or air intake
- A wiring fault
When to call an engineer
Once you've checked nothing is blocking the flue outside, it's a job for a Gas Safe engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Worcester Bosch C6 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Worcester Bosch boiler
Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.