Worcester Bosch fault code
Worcester Bosch D5: condensate pump failure
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
On CDi Highflow models, the condensate pump has failed.
Safe checks you can do
- Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
Common causes
- A failed or blocked condensate pump
- A frozen or blocked condensate pipe
When to call an engineer
If the outside pipe isn't frozen, an engineer needs to check the condensate pump.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Worcester Bosch D5 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Worcester Bosch boiler
Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.