Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Worcester Bosch fault code

Worcester Bosch 1037: outside sensor fault

Try the checks, then call an engineer

Checked against 2 sources ยท Updated November 2026

What it means

On the 8000 Style, the outside temperature sensor is defective.

Safe checks you can do

  1. Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.

Common causes

  • A faulty outdoor weather sensor
  • Damaged wiring to the sensor outside

When to call an engineer

Only boilers with a weather compensation sensor show this. An engineer can test or replace the sensor.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Worcester Bosch 1037 myself?

Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.

How to reset a Worcester Bosch boiler

Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.