Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Worcester Bosch fault code

Worcester Bosch 1021: hot water sensor fault

Needs a Gas Safe engineer

Checked against 2 sources ยท Updated November 2026

What it means

On the 8000 Style, the hot water sensor is defective or unplugged.

Safe checks you can do

  1. Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.

Common causes

  • A failed hot water temperature sensor
  • A loose connection

When to call an engineer

The heating usually still works. Book an engineer to replace the sensor at a convenient time.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Worcester Bosch 1021 myself?

No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.

How to reset a Worcester Bosch boiler

Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.