Worcester Bosch fault code
Worcester Bosch 1010: controls bus cable fault
Try the checks, then call an engineerChecked against 2 sources ยท Updated November 2026
On the 8000 Style, the EMS bus cable to the controls is missing or damaged.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- A loose cable between the display and the main board
- A wiring fault with external controls
- A faulty board
When to call an engineer
If restarting doesn't clear it, an engineer needs to check the internal connections and any external controls.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Worcester Bosch 1010 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Worcester Bosch boiler
Press the reset button (marked with a circular arrow or the word reset) and hold it for a few seconds until the display changes. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.