Vaillant fault code
Vaillant F.75: pump didn't detect a pressure rise
Try the checks, then call an engineerWhen the pump starts, the boiler expects the water pressure to jump slightly. With F.75 it didn't see that jump. Vaillant's manual calls this a pump or water shortage fault.
Safe checks you can do
- Check the pressure gauge. Find the pressure gauge on the front or underneath the boiler. With the heating off and the boiler cold it should read roughly 1 to 1.5 bar. Anything under 1 bar is low. How to do this
- Top the pressure up if it's low. Open the filling loop slowly and watch the gauge. Stop at about 1.5 bar, close both valves fully, then reset the boiler. How to do this
- Bleed air out of the radiators. Radiators that are cold at the top have air in them. Bleed them with a radiator key, then check the pressure again, because bleeding lowers it. How to do this
- Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this
Common causes
- Low water pressure in the system
- Air trapped in the boiler or radiators
- A faulty or sticking pump
- A faulty water pressure sensor
When to call an engineer
If the pressure is fine and the code still comes back, the pump or pressure sensor probably needs replacing. That's an engineer job.
Need it fixed?
Get a Gas Safe engineer to call you back about Vaillant F.75, or cover future breakdowns with a monthly plan.
Some links are partner links. How we make money.
Can I fix Vaillant F.75 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Vaillant boiler
On most Vaillant models press the reset button (the circular arrow) once. Some ranges reset from the menu. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.