Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Guide

How to reduce boiler pressure

Quick answer

Turn the heating off and let it cool, then bleed a radiator with a radiator key, a little at a time, until the gauge falls back to about 1.5 bar.

  1. Turn the heating off and let the system cool. Hot water and steam can scald.
  2. Check the filling loop valves are fully closed. A slightly open valve is the most common cause of rising pressure.
  3. Bleed a radiator. Put a cloth under the valve at the top corner, fit a radiator key and turn it a quarter turn anti-clockwise. Air will hiss out, then water.
  4. Close the valve and check the gauge. Repeat a little at a time until it reads about 1.5 bar.

If it keeps going up

Pressure that climbs on its own, with the filling loop closed, can mean a leaking filling valve or a failed expansion vessel inside the boiler. Both need an engineer.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).