Vaillant fault code
Vaillant F.72: temperature sensor mismatch
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
The two temperature sensors on the pipes are disagreeing by too much. The manual says the temperature difference between the flow and return sensors is too great.
Safe checks you can do
- Check the pressure gauge. Find the pressure gauge on the front or underneath the boiler. With the heating off and the boiler cold it should read roughly 1 to 1.5 bar. Anything under 1 bar is low. How to do this
- Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this
Common causes
- A faulty flow or return sensor
- A sensor that has come loose from the pipe
- Low pressure, in some cases
When to call an engineer
Sensor faults need an engineer to test and usually replace the sensor.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Vaillant F.72 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Vaillant boiler
On most Vaillant models press the reset button (the circular arrow) once. Some ranges reset from the menu. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.