Vaillant fault code
Vaillant F.65: electronics overheating
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
The circuit board is too hot, either because it's defective or because of heat from outside the boiler.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- A fault on the main circuit board
- A loose internal connection
- A power surge
When to call an engineer
If turning the power off and on doesn't clear it, the circuit board needs checking by an engineer.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Vaillant F.65 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Vaillant boiler
On most Vaillant models press the reset button (the circular arrow) once. Some ranges reset from the menu. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.