Vaillant fault code
Vaillant F.27: flame detected when there shouldn't be one
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
The boiler's flame sensor is reporting a flame while the gas is off. Vaillant calls it flame simulation.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- Moisture on the ignition or flame sensing electrode
- A faulty electrode
- A circuit board fault
When to call an engineer
An engineer needs to check the electrode and electronics. Turning the power off and on may clear it temporarily, but it's likely to come back.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Vaillant F.27 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Vaillant boiler
On most Vaillant models press the reset button (the circular arrow) once. Some ranges reset from the menu. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.