Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Baxi fault code

Baxi E15: gas valve command fault

Needs a Gas Safe engineer

Checked against 2 sources ยท Updated November 2026

What it means

The board's command to the gas valve isn't working.

Safe checks you can do

There isn't a safe check for this one beyond noting the code. Leave the casing closed and book an engineer.

Common causes

  • A faulty gas valve
  • Damaged wiring to the gas valve
  • A circuit board fault

When to call an engineer

This is a gas component. Leave the casing closed and book a Gas Safe engineer. If you ever smell gas, call the National Gas Emergency Service on 0800 111 999.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Baxi E15 myself?

No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.

How to reset a Baxi boiler

Press and hold the reset button for one to three seconds, or until the boiler restarts. On older dial models, turn the selector to reset and hold it for about five seconds. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.