Baxi fault code
Baxi E160: fan fault
Needs a Gas Safe engineerChecked against 1 source · Updated November 2026
The boiler has detected a fan fault. Heatable says to contact Baxi if it's under warranty, or a Gas Safe engineer if not, and quotes roughly £150 to £200 for the repair.
Safe checks you can do
- Look at the flue from outside. Check the flue terminal on the outside wall or roof isn't blocked by leaves, a nest, snow or something stacked in front of it. Don't touch, cover or take apart the flue itself.
Common causes
- A failed fan
- Wiring or connection fault
- A blocked flue
When to call an engineer
Book a Gas Safe engineer, or Baxi if your boiler is under warranty.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Baxi E160 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Baxi boiler
Press and hold the reset button for one to three seconds, or until the boiler restarts. On older dial models, turn the selector to reset and hold it for about five seconds. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.