Baxi fault code
Baxi E28: flue fault
Needs a Gas Safe engineerChecked against 1 source ยท Updated November 2026
Heatable lists E28 as a flue fault, meaning the boiler has detected a problem with how exhaust gases are leaving the boiler.
Safe checks you can do
- Look at the flue from outside. Check the flue terminal on the outside wall or roof isn't blocked by leaves, a nest, snow or something stacked in front of it. Don't touch, cover or take apart the flue itself.
Common causes
- A blocked flue terminal
- A faulty flue sensor or fan
When to call an engineer
Flue faults need a Gas Safe engineer. Don't keep resetting.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Baxi E28 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Baxi boiler
Press and hold the reset button for one to three seconds, or until the boiler restarts. On older dial models, turn the selector to reset and hold it for about five seconds. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.