Baxi fault code
Baxi E.04.12: false flame signal
Needs a Gas Safe engineerChecked against 2 sources ยท Updated November 2026
On Baxi 200 and 400 combis, a flame signal was detected when there shouldn't be one.
Safe checks you can do
- Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.
Common causes
- Moisture on the flame sensing electrode
- A faulty electrode or lead
- A circuit board fault
When to call an engineer
A Gas Safe engineer needs to check the electrode and electronics.
Need an engineer?
For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).
Can I fix Baxi E.04.12 myself?
No. Apart from the simple outside checks here, this needs a Gas Safe registered engineer.
How to reset a Baxi boiler
Press and hold the reset button for one to three seconds, or until the boiler restarts. On older dial models, turn the selector to reset and hold it for about five seconds. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.