Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Baxi fault code

Baxi E.02.00: reset in progress

No fault to fix

Checked against 2 sources ยท Updated November 2026

What it means

On Baxi 200 and 400 combis, the boiler is resetting after the reset button was pressed. Just wait.

Safe checks you can do

Nothing. This isn't a fault, so there's nothing to fix.

Common causes

  • Normal operation

When to call an engineer

No engineer needed unless the boiler isn't heating when it should be.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Baxi E.02.00 myself?

There's nothing to fix. This code is information rather than a fault.

How to reset a Baxi boiler

Press and hold the reset button for one to three seconds, or until the boiler restarts. On older dial models, turn the selector to reset and hold it for about five seconds. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.