Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Glow-worm fault code

Glow-worm F15: ebus voltage failure

Try the checks, then call an engineer

Checked against 2 sources ยท Updated November 2026

What it means

On older Glow-worm Ultracom cxi boilers, Glow-worm lists F15 as: ebus voltage failure. Newer Glow-worm boilers show codes with a dot, such as F.28.

Safe checks you can do

  1. Turn the power off and on. Switch the boiler off at the fused spur on the wall for a few seconds, then back on. This restarts the electronics.

Common causes

  • A loose cable between the display and the main board
  • A wiring fault with external controls
  • A faulty board

When to call an engineer

If restarting doesn't clear it, an engineer needs to check the internal connections and any external controls.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Glow-worm F15 myself?

Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.

How to reset a Glow-worm boiler

Press the reset button (the circular arrow) once. If the code returns straight away, don't keep resetting. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.