Glow-worm fault code
Glow-worm F.28: failed to light on start-up
Try the checks, then call an engineerThe boiler couldn't light at start-up. Boiler Central notes it can be caused by a frozen condensate pipe.
Safe checks you can do
- Check you have gas. Try the hob or another gas appliance. If nothing works, check the lever on the gas meter is in line with the pipe (that means on) and, on a prepayment meter, that you have credit.
- Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
- Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this
Common causes
- No gas or prepayment credit run out
- A frozen condensate pipe
- An ignition fault
When to call an engineer
If gas is on and the pipe isn't frozen, call a Gas Safe engineer.
Need it fixed?
Get a Gas Safe engineer to call you back about Glow-worm F.28, or cover future breakdowns with a monthly plan.
Some links are partner links. How we make money.
Can I fix Glow-worm F.28 myself?
Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.
How to reset a Glow-worm boiler
Press the reset button (the circular arrow) once. If the code returns straight away, don't keep resetting. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.
Sources
We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.