Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Glow-worm fault code

Glow-worm F1: ignition fault

Try the checks, then call an engineer

Checked against 2 sources ยท Updated November 2026

What it means

On older Glow-worm Ultracom cxi boilers, Glow-worm lists F1 as: ignition fault. Newer Glow-worm boilers show codes with a dot, such as F.28.

Safe checks you can do

  1. Check you have gas. Try the hob or another gas appliance. If nothing works, check the lever on the gas meter is in line with the pipe (that means on) and, on a prepayment meter, that you have credit.
  2. Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
  3. Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this

Common causes

  • No gas reaching the boiler: meter off or prepayment credit run out
  • A frozen condensate pipe in cold weather
  • A worn ignition electrode or faulty gas valve
  • Low gas pressure

When to call an engineer

If your gas is on, the condensate pipe isn't frozen and the code returns after a reset, book a Gas Safe engineer.

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Can I fix Glow-worm F1 myself?

Sometimes. Try the safe checks on this page first. If the code comes back, you need a Gas Safe engineer.

How to reset a Glow-worm boiler

Press the reset button (the circular arrow) once. If the code returns straight away, don't keep resetting. Only reset once or twice. A code that keeps returning is the boiler telling you something needs fixing.

Sources

We checked this code against the following, last reviewed November 2026. Codes can vary slightly between models, so your boiler's own manual is the final word.