Smell gas? Leave the property and call the National Gas Emergency Service on 0800 111 999, 24 hours.

Fault code, any brand

E133 boiler fault: what it means

Short answer

E133 is a Baxi Group code, also used on Potterton boilers. It means the gas supply was interrupted or the boiler failed to light. In winter it's often a frozen condensate pipe.

Boiler codes aren't standard across manufacturers, so check the brand name on the front of your boiler. Here's what E133 means on each brand that uses it:

E133

On a Baxi boiler: gas supply interrupted or ignition failed

The boiler couldn't light, usually because gas isn't getting through. Baxi says this code can also appear when the condensate pipe has frozen.

Try the checks, then call an engineer

Full Baxi E133 guide and fixes

E133

On a Potterton boiler: gas supply interrupted

The boiler couldn't light, usually because of the gas supply. In freezing weather Baxi Group says it can also mean a frozen condensate pipe.

Try the checks, then call an engineer

Full Potterton E133 guide and fixes

First things to check

  1. Check you have gas. Try the hob or another gas appliance. If nothing works, check the lever on the gas meter is in line with the pipe (that means on) and, on a prepayment meter, that you have credit.
  2. Check the condensate pipe in freezing weather. The plastic pipe that runs from the boiler to an outside drain can freeze when it's below zero. Thaw it with a hot water bottle or warm water from a watering can, never boiling water, then reset. How to do this
  3. Reset the boiler, once or twice. Use the reset button or reset position on the dial, as your user manual shows. If the same code comes straight back after one or two resets, stop and book an engineer. How to do this

Need an engineer?

For anything beyond the safe checks on this page, use a Gas Safe registered engineer. Find one near you, or check an engineer's ID, on the official Gas Safe Register (free helpline 0800 408 5500).

Look up a different code